This is a Minitrains F&C 0-4-0 chassis with a TCS KAM4 decoder. It’s a nice decoder with a pretty impressive stay alive.
I think I can fit it under the body of the O9 loco I’m making, with one small modification to the chassis.
I removed the metal chip with the raised edges and replaced it with a flat piece of plasticard. This will enable the chip to sit a little lower on the chassis and fit under the boiler of the loco body.
Steve's Narrow Gauge Railway Adventure 
Hey Steve – using your blog as a source of inspiration again! Spotted one of these Minitrains locos in a model shop today and got me thinking about using it for a G9 loco.
Do you have a measurement for how far that flywheel is off the ground with the loco on a flat surface? I would hide it inside a firebox but not sure I will be able to make one a convincing size.
Christian
LikeLike
Hi Christian,
I’m pleased you enjoy the blog.
G9 sounds interesting – let me know how you get on !
The hieght from the top of the rail to the top of the flywheel is approx 29mm – Hope that helps
All the best
Stephen
LikeLike
Cheers Stephen! Could work for me, I’ll have a think/design.
LikeLike